How To Reset JBL Tune 700 BT Headphones

Welcome to the world of experiences, with the JBL Tune 700 BT headphones! These headphones are sleek and versatile designed to enhance your music, calls and overall entertainment experience.

However like any device there may come a time when you’ll need to reset your JBL Tune 700 BT headphones for performance.

Whether you’re facing connectivity issues experiencing glitches or simply want to give your device a start it’s important to know how to reset your JBL Tune 700 BT headphones.

In this guide we will take you through the step, by step process of resetting your headphones.

Without any delay let’s delve into the steps that will assist you in resetting your JBL Tune 700 BT headphones.

Preparation For Resetting JBL Tune 700 BT Headphones

What happens if, during the process of resetting your JBL Tune 700 BT headphones? any damage occurs? your headphones do not turn on? your JBL Tune 700 BT headphones never charge or connect and you need to go in the direction of another pair of headphones. 

The reason for these problems could be that you did not follow the proper steps to reset your JBL Tune 700 BT headphones, and they were not adequately prepared before the reset.

In this section, we have provided you with a guide on how to prepare your JBL Tune 700 BT headphones for the resetting process, so that you can avoid these issues.

Turn On Your JBL TUNE 700 BT Headphones

To begin, just like every electronic device needs to be turned on or any issues inside it need to be resolved for repair, here you also need to turn on your JBL Tune 700 BT headphones.

To turn on, simply locate the power button on your JBL Tune 700 BT headphones and press and hold it for approximately 3-5 seconds. Keep holding it until you see the LED lights flashing.

Once the LED lights start flashing, release the power button.

Your headphones are now turned on.

Disconnect Your JBL Tune 700 BT Headphones 

After turning on, you need to disconnect your JBL Tune 700 BT headphones from any previously connected device.

“” You must have heard that if someone interrupts and starts speaking before you finish, it can be unpleasant! “”

Well, this guide is focused on the complete process of connecting and disconnecting JBL Tune 700 BT headphones. Follow these steps.

Charge Your Jbl Tune 700 BT Headphones (If Applicable)

This preparation section is for users who do not have any charging issues with their JBL Tune 700 BT headphones. 

They only want to address any other problems with their headphones. 

Before starting the resetting process, it is essential to sufficiently charge your JBL Tune 700 BT headphones, as the resetting process utilizes the headphone battery.

A minimum of 20% battery charge is necessary to initiate this process.

Note: If your JBL Tune 700 BT headphones are specifically facing charging issues, you can simply skip these steps and proceed directly to the resetting process.

How to Reset JBL Tune 700 BT Headphones Using Hard Factory Reset

The term “hard factory reset” refers to the process of completely erasing all data and settings on your JBL Tune 700 BT headphones, as well as any connected devices. 

In other words, if you wish to eliminate all the data and files on your JBL Tune 700 BT headphones, you can follow these steps.

Before starting the hard factory resetting process, prepare your JBL Tune 700 BT headphones. To do this, Look at the above guide.

Next, locate the volume up ( + ) and volume down ( – ) buttons on your JBL Tune 700 BT headphones.

Once you find the buttons, press and hold them simultaneously for about 5 seconds.

Continue holding until the LED lights on your JBL Tune 700 BT headphones start flashing.

After the LED lights flash, release the volume buttons.

Your JBL Tune 700 BT headphones have now been hard reset.

Now, simply connect your JBL Tune 700 BT headphones to any device. Here’s the complete guide to connect your jbl tune 700 BT headphones. 

How to Reset JBL Tune 700 BT Headphones Using Soft Factory Reset

Soft factory reset refers to the process of resetting Jbl tune 700 BT headphones without losing any data or files.  

In this section, the methods and steps are provided that can be followed to reset your JBL Tune 700 BT headphones without losing any data or files from other devices.

Here are the Methods!

Using Bluetooth Settings On Different Devices

Using the Bluetooth settings on your device, you can perform a soft reset on your JBL Tune 700 BT headphones. We have provided instructions below on how to soft reset your JBL Tune 700 BT headphones using the Bluetooth settings on different devices.

Windows:

First, open the Bluetooth settings on your Windows. You can do it by simply clicking the start Button at the Bottom-left corner of the Home screen in windows.

And then from the menu go to settings, then Bluetooth.

Then, locate the JBL Tune 700 BT Headphones in the list of paired devices on the Bluetooth Setting’s page.

Next, right-click on the JBL Tune 700 BT and select “Remove” or “Forget.”

Then, turn off the Bluetooth on your laptop.

At the same moment, turn off the JBL Tune 700 BT Headphones.

Now, your jbl tune 700 BT headphones have been soft reset and ready to use. 

Laptop (Mac):

First, open System Preferences on your Mac. you can do it by simply clicking on the top-left corner at the APPLE Symbol and from the menu choosing System Prefences.

Then, click on “Bluetooth.”

Next, find the JBL Tune 700 BT in the list of connected devices.

Next, right-click on the JBL Tune 700 BT and choose “Remove” or “Forget This Device.”

Then, turn off Bluetooth on your Mac.

At the same moment, turn off the JBL Tune 700 BT Headphones.

Now, your jbl tune 700 BT headphones have been soft reset using bluetooth settings on your MAC and ready to use. 

IOS (Iphone, Ipad, etc):

First, open the Settings app on your iPhone. 

Settings App could be Found among your apps. You can also access it by swiping down and accessing the control centre and then go to settings. 

Next, go to the “Bluetooth” section in settings.

Then, find the JBL Tune 700 BT Headphones in the list of devices.

At the same moment, tap the “i” icon next to the JBL Tune 700 BT Headphones.

Subsequently, tap “Forget This Device.”

Following this, turn off Bluetooth on your iPhone.

Simultaneously, turn off the JBL Tune 700 BT Headphones.

You’re good to go.

Android:

Firstly, access the Settings app on your Android device. Settings App could be found among the other Apps.

Next, navigate to either “Connections” or “Bluetooth.”

Afterward, locate the JBL Tune 700 BT Headphones within the list of paired devices.

Simultaneously, tap on the settings (gear) icon adjacent to the JBL Tune 700 BT Headphones.

Then, choose between “Forget” or “Unpair.“

Finally, re-pair the devices.

Using JBL Headphones App

Another method to perform a soft factory reset on your JBL Tune 700 BT headphones is to use the official JBL headphones app.

The JBL app contains all the available models that fall under the JBL Tune category.

Follow the steps below:

First, ensure that you have the latest version of the JBL Headphones app installed on your device. 

You can Install it from the App Store for iOS devices or the Google Play Store for Android devices. 

After opening the app, connect to your JBL Tune 700 BT headphones through the app.

At this point, look for an option within the app that allows you to manage your headphones. You’ll typically find it in the settings menu of the app.

There, go to the rest option and choose your Jbl tune 700 BT Headphones.

Simultaneously, the app is likely to provide prompts or confirmation dialogs to ensure that you want to proceed with the reset. 

Confirm your decision through the prompts provided to complete the resetting process.

Note: Make sure your JBL Tune 700 BT headphones are paired with your device through Bluetooth.

Why Are My JBL Tune 700 BT Headphones Not Resetting 

It’s frustrating when your JBL Tune 700 BT headphones aren’t cooperating, especially when you’re trying to reset them. 

But don’t worry, though – we’ve got your back. 

Here are the few reasons that your jbl tune 700 BT headphones are not resetting:

Incorrect / Incomplete Resetting Method:

You’ve to make sure that you’re on the right track for the reset process. Also, make sure that you complete each and every step correctly. 

Low Battery Level:

Sometimes, Jbl tune 700 BT headphones won’t reset if the battery level is too low. Charge your Jbl tune 700 BT headphones fully and then attempt the reset.

Bluetooth Connection:

You’ve to avoid adding another device to pair during the resetting process. 

Disconnect your Jbl tune 700 BT headphones from any paired devices via Bluetooth before attempting the reset. This helps ensure a clean slate for the reset process.

Physical Damage:

Make sure that your Jbl tune 700 BT headphones do not have any physical damage, such as broken buttons or connectors,  Physical damages could be the reason that you can’t reset your jbl tune 700 BT headphones

Software Glitch:

Like any other electronic device, your jbl tune 700 BT headphones can also experience software glitches. You should restart them before starting the resetting process.

Conclusion:

There you go! resetting your JBL Tune 700 BT headphones might feel a bit like solving a puzzle, but with the right steps, you’re on your way to enjoying uninterrupted music. 

Remember, it’s all about patience and precision. If you’ve followed our guide and each step, then,  you’re doing great. We’ve guided you all about the methods and steps you can follow to resolve any issue undergoing with your jbl tune 700 BT headphones. 

And if you ever find yourself stuck, don’t hesitate to reach out to JBL support for that extra boost. Happy listening!