Among the many models of JBL, one is the JBL Tune 510BT. Many users praise its features, while some have reported encountering errors. There are several issues which can be fixed by resetting JBL Tune 510BT.
In this article, I will show you how to reset the JBL Tune 510BT. The steps to reset the JBL Tune 510BT are quite simple if followed properly. During the resetting process, it’s important to keep a few things in mind, and after resetting, many common errors can be fixed.
I will discuss what those things are and which errors can be fixed in this article. Please make sure to read the article carefully.
Things To Consider Before Resetting
Before resetting the JBL Tune 510BT, keep the following points in mind to ensure you do not encounter any kind of glitch during the resetting process.
Turn off Bluetooth:
Before resetting the JBL Tune 510BT, the first step is to turn off its Bluetooth. To turn off the Bluetooth, pick up the JBL Tune 510BT and press and hold the Bluetooth button located on the backside of the earpiece for 5 seconds or more. Doing this will turn off its Bluetooth.
Disconnect The Devices:
Make sure that your JBL Tune 510BT’s Bluetooth is turned off. After that, turn off the Bluetooth of your device as well, ensuring that headphone is not connected to any other devices.
If you are an Android user, you can go into the settings menu, find the Bluetooth option, and turn it off from there. By doing so, if your JBL Tune 510BT is connected, it will be disconnected.
Read Here: How to Pair JBL Tune 510bt
Steps To Perform Soft Reset JBL Tune 510bt:
Let me now show you how to perform a soft reset on the JBL Tune 510BT. This is not a difficult task; a soft reset is much simpler compared to a hard reset and is essentially like turning headphones off and then on again. A soft reset is done to fix minor issues and glitches without losing data or saved settings on the headphones.
To perform a soft reset, follow the steps below:
Pick up your JBL Tune 510BT.
Press and hold the power button for 5 seconds or more to turn it off.
Wait for 10 seconds.
Then press the power button again to turn it back on.
There you go, your JBL Tune 510BT has been soft reset.
Steps To Perform Hard Reset JBL Tune 510bt:
Now, I’ll tell you about performing a hard reset on JBL Tune 510bt, also called a factory reset. By doing a hard reset, your JBL Tune 510BT will go back to its original state, just like when it was new, with all saved files and settings deleted.
This is done to fix large and major errors. To perform a hard reset, follow the steps below:
Pick up your JBL Tune 510BT.
Press and hold the volume up and volume down buttons at the same time.
Keep them pressed for at least 15 seconds or more.
By doing this, your JBL Tune 510BT has been hard or factory reset.
A Quick Difference Between Soft & Hard Reset
Aspect | Soft Reset | Hard/Factory Reset |
Definition | Reboot device | Restore original settings |
Data Loss | No data loss | Erases all data |
Purpose | Fix minor glitches | Fix significant issues |
Process | Quick, simple | Extensive, thorough |
How to Reset Bluetooth on JBL Tune 510BT:
Often, there are situations where instead of resetting the headphones, you need to reset the Bluetooth of the JBL Tune 510BT. Now, I will also tell you how you can reset the Bluetooth of the JBL Tune 510BT. To reset the Bluetooth of the JBL Tune 510BT, follow the steps outlined below
Turn on your JBL headphones by pressing the power button.
Then, press and hold the Bluetooth button on the headphones for 5 seconds or more.
Note that when the LED ring on the JBL Tune 510BT starts flashing red, release the Bluetooth button.
Now, turn off your JBL Tune 510BT and then turn it back on again. Your Bluetooth should be reset.
Any devices previously connected will now be unpaired, so you’ll need to pair them again.
Issues That Will Be Fixed After Resetting The JBL Tune 510bt:
If you want to know why it is necessary to reset the JBL Tune 510BT, let me tell you the benefits. By resetting it, you can easily solve the following issues mentioned below if you encounter any JBL Tune 510bt errors with your Bluetooth headphones.
JBL Tune 510bt One Side Not Working
You can often perform a soft or hard reset on the JBL Tune 510BT to fix the ‘One Side Not Working’ error; it’s quite easy. If resetting the JBL Tune 510BT does not fix this error, then you can take some extra steps to fix the JBL Tune 510bt one side not working error.
Dropped Signals:
There is a drop signal error that JBL Tune 510BT headphone users often complain about. This error causes the headphone to drop the signal and not send any kind of signal even if it is turned off, with the blue light blinking continuously.
To fix this error, follow these steps: Reset your JBL Tune 510BT headphone and Bluetooth according to the steps given above.
You can also follow this step:
Press and hold the volume up, volume down, and the adjacent pause/play button simultaneously for more than 10 seconds, then turn off your JBL Tune 510BT headphones. After 10 seconds, turn it on again, and hopefully, the drop signal error will be automatically fixed.
Unable to Connect:
Failure to connect is such an error that many users of JBL Tune 510BT complain about. They say that their headphones don’t connect to their devices, whether it’s a laptop or an Android, causing them to face difficulties.
Let me tell you, if you’re also a user of JBL Tune 510BT and facing the failure to connect error, you can fix this error by following the resetting steps mentioned above. Simply reset your JBL Tune 510BT headphones according to the steps provided and fix your error.
Remember, before resetting, your headphones should be fully charged to fix this error. Ensure that your headphones are fully charged before proceeding with resetting to fix this error.
Frequent Disconnects:
Many headphone users experience frequent disconnects, where their headphones disconnect from their devices while they are listening to something, only to reconnect shortly after.
This disconnection issue often persists, but if you’re trying to fix it, you can follow the reset steps provided. Whether it’s a soft reset, hard reset, or Bluetooth reset, performing any of these steps might resolve the error for you.
Read Here: JBL Tune 510bt Not Charging
Conclusion:
In this article, I detailed the steps on how to reset the JBL Tune 510BT. I explained how to perform a soft reset, a hard reset, and how to reset the Bluetooth of the JBL Tune 510BT. I also mentioned the importance of keeping certain things in mind before resetting. Additionally, I informed you about the benefits of resetting and the types of errors you can fix through resetting. I hope this article proves to be very helpful for you.
![Aniq Author and CEO](https://www.decisivesound.com/wp-content/uploads/2023/07/aniqqqq.jpg)
Aneeq Aish takes immense pride in being a dedicated researcher, committed to helping individuals like you make well-informed and decisive choices before purchasing or fixing any sound-related equipment like headphones & speakers.