Are you the owner of JBL Tune 225 TWS earbuds?
And you are facing difficulties while listening to your music that are compelling you to consider throwing your JBL Tune 225 TWS earbuds in the trash?
Well, undoubtedly, if that’s the case, You are not alone.
Because whenever the topic of enjoying music with JBL Tune 225 TWS earbuds is brought up, numerous problems arise that render the JBL Tune 225 TWS earbuds virtually unusable.
Issue such as JBL Tune 225 TWS one side (left or right) earbud not working.
In today’s guide, we will share with you our experiences and the best solutions after implementing many solutions to address these problems. If you want to use your JBL Tune 225 TWS earbuds properly or resolve any issues discussed below, read this guide thoroughly.
You’ll be able to resolve this “Jbl tune 225 TWS one side (left/right) earbud not working” issue.
Reset Your JBL Tune 225 TWS Earbuds
Sometimes, your Jbl tune 225 TWS earbuds need to start a new session OR needs to clear all the previous connections and data. This is important to do so that you can maintain your Jbl tune 225 TWS earbuds.
In this case, if your Jbl tune 225 TWS one side (Left/Right) earbud is not working, you need to factory reset Jbl tune 225 TWS earbuds.
For this keep in mind that you cannot reset your JBL Tune 225 TWS earbuds separately. You need to reset both earbuds at the same time.
Here is the comprehensive guide to reset JBL Tune 225 TWS earbuds using various methods.
After completing the reset process, try reconnecting your earbuds. High chance that you would resolve this “Jbl tune 225 TWS one side(left/right) earbud not working” issue.
Note: If resetting doesn’t work, proceed to the next section or method. As long as one method is not successful, move on to the next set of methods or steps.
Manually Syncing JBL Tune 225 TWS Earbuds
You can resolve this “Jbl tune 225 TWS earbuds’ one side (left/right) not working” issue by synchronising your Jbl tune 225 TWS earbuds.
To address this issue, you need to follow a few simple steps to sync your JBL Tune 225 TWS earbuds.
First, make sure both earbuds are turned on.
To turn on jbl tune 225 TWS earbuds, press and hold the buttons on both earbuds simultaneously for a few seconds until you see some indication that they are turned on.
That indication (LED light) says that your Jbl tune 225 TWS earbuds are turned on and now in pairing mode.
Next, Press the Power buttons on both JBl tune 225 TWS earbuds (Left and right) for 3 times.
This will synchronize your Jbl tune 225 TWS earbuds with each other.
Another method to Synchronize your Jbl tune 225 TWS Earbuds (left and right) is to reset them.
After syncing your both Jbl tune 225 TWS earbuds with each other, try to use them. We’re sure that you’ll resolve this” JBl tune 225 TWS lone side (left/right) earbuds not working” issue this time.
Note: Here, to prevent accidental pairing with a device, turn off Bluetooth on the device you used last or any nearby Bluetooth-enabled devices.
Rebuild Your JbL Tune 225 TWS Earbuds Connection with your Device
If your JBL Tune 225 TWS earbuds’ one side (Left or right) is not working, you need to rebuild your connection from scratch.
Firstly, you should forget or unpair your JBL Tune 225 TWS earbuds (either left or right or both) from your device.
To do this, go to your device settings, find Bluetooth, and then in the Bluetooth settings, locate your JBL Tune 225 TWS earbuds in the list of connected devices.
Unpair or forget your earbuds by clicking on the respective button.
Additionally, turn off the Bluetooth on your device.
Afterwards, start from the beginning and connect JBL Tune 225 TWS earbuds to your device.
Update The Driver
Another reason that your Jbl tune 225 TWS earbuds’ one side (left/right) not working, is that you have not installed any Driver or Update The drivers for Bluetooth In your Device.
Updating or installing Bluetooth drivers is crucial for maintaining compatibility, addressing issues, enhancing security, and optimizing the overall performance of Bluetooth-enabled devices(Jbl tune 225 TWS earbuds)
Update The Firmware
Sometimes your Jbl tune 225 TWS earbuds need to be updated to solve the not working issue. JBl tune 225 TWS earbuds’ firmware uploads some updates time by time.
Updating your Jbl tune 225 TWS earbuds could be the one method that can solve your Not working issue for your Jbl tune 225 TWS earbuds.
Here’s how to do it:
First, visit the official JBL website and look for your specific earbud model. Here you choose “JBl tune 225 TWS earbuds”
There, check the support or downloads section for any available firmware updates.
If you cannot find information on firmware updates, contact JBL customer support. They can provide guidance on any available updates and the steps to follow.
Charge Your JBL Tune 225 TWS Earbuds
Are you using your JBL Tune 225 TWS earbuds with a 10% or 15% charge? And you’re trying to listen to your music on your earbuds, then you’re wasting your time because they will not work.
Your jbl tune 225 TWS earbuds’ one side (left/right) not working issue will continue if they are not properly charged. Therefore, charge your JBL Tune 225 TWS earbuds properly before using them.
To Charge Your Jbl tune 225 TWS earbuds follow the below guide:
First, ensure that both Jbl tune 225 TWS earbuds are properly placed in their respective slots in the charging case.
Next, connect the charging case to a power source using the provided USB cable. The case usually has a micro USB or USB-C port.
The Jbl tune 225 TWS earbuds will begin charging once placed in the case, and the LED indicators on the case will show the charging progress.
Once the earbuds are fully charged, disconnect the charging case from the power source.
You can then remove your Jbl tune 225 TWS earbuds from the case for use.
Check Your Device Compatibility
What if you use a wrench or screw with a maximum range of 100cm to tighten a 150cm nut? Obviously, it’s not suitable for that nut.
Similarly, if your JBL Tune 225 TWS earbuds are not suitable for a particular device, your earbuds’ one side (left or right) or Both will not work.
If your device, with which you want to connect your JBL Tune 225 TWS earbuds, does not accept them, you need to first determine whether your device is compatible with your earbuds.
If your device does not accept your JBL Tune 225 TWS earbuds, you need to find another device that can accept it with your JBL Tune 225 TWS earbuds.
The solution for this reason is simply use another device to connect with your Jbl tune 225 TWS earbuds. ANd solve not working.
Read Here: JBL Tune 225 TWS Earbuds Common Problems And Solutions
Check JBL Tune 225 TWS Earbuds Mono Mode
If one side of your JBL Tune 225 TWS earbuds is not working, another possible reason could be that you have put your JBL Tune 225 TWS earbuds in mono mode.
Mono mode means that you have enabled or given permission to use only one side of your JBL Tune 225 TWS earbuds.
Therefore, it is essential to check whether your JBL Tune 225 TWS earbuds (left/right) are not set to mono mode.
JBL Tune 225 TWS earbuds typically do not have a manual mono mode that you can enable or disable. These earbuds are designed to automatically switch between stereo and mono modes depending on how you use them.
So, the solution is to reset them and try reconnecting.
Once you’ve reset your earbuds, give them another go to see if it resolves the problem of one side (left/right) not working on your JBL Tune 225 TWS earbuds.
Clean Your JBL Tune 225 TWS earbuds
The primary and main reason why your JBL Tune 225 TWS earbuds are not working is that there might be a buildup of earwax or some other dirt in that particular earbud.
The accumulation of earwax can block the sound on that side, preventing you from hearing the audio in either the left or right earbud.
Therefore, by following our comprehensive guide to clean JBL Tune 225 TWS, you can effectively remove earwax, oil, and other debris from your JBL Tune 225 TWS earbuds.
This will allow you to enjoy audio from both the left and right sides of your Jbl tune 225 TWS earbuds without any issues.
Check Out The Audio Balance
It seems like you might have seen a seesaw before. Just like that, the audio balance feature works in terms of sound output.
If one side of your JBL Tune 225 TWS earbuds is not working, then your earbuds’ audio balance is disturbed.
Audio balance refers to how the sound is distributed in your JBL Tune 225 TWS earbuds. If the audio balance is fixed towards one side, it means that the earbuds are producing sound only on that particular side.
Therefore, it is necessary to check the sound distribution of your JBL Tune 225 TWS earbuds.
Here’s how to do it:
On Windows PC/Laptop:
First, right-click on the speaker icon in the system tray.
Then, select “Open Sound settings.
Then, under the “Advanced sound options,” click on “App volume and device preferences.”
Adjust the volume balance for each application.
On macOS:
First, open “System Preferences” from the Apple Symbol at the top-left corner on your Mac screen.
Next, select “Sound.”
Then, go to the “Output” tab.
Last, click on the balance slider to adjust left/right audio balance.
On Android:
First, open the “Settings” app.
Then, navigate to “Sound” or “Sound & vibration.”
There, look for an option related to audio balance or left/right audio adjustment and adjust it.
On iPhone/iPad:
First, open the “Settings” app.
Then, go to “Accessibility.”
There, under “Hearing,” find the “Audio/Visual” section.
Then, adjust the “Left/Right Audio Balance” slider.
On Linux:
First, open “Settings” and go to “Sound.”
Then, in the “Output” or “Input” tab, select your device.
There, adjust the balance using the slider.
Read Here: JBL Tune 225 TWS Earbuds Asking for PIN: Connect Without PIN
Conclusion:
Solving this type of issue “Jbl tune 225 TWS (left/right) earbud not working” can be a headache. Especially for those who love music and are facing this issue in their Jbl tune 225 TWS earbuds..
But in today’s guide we’ve walked through all the possible reasons and their solutions. This issue Might be because of build up of earwax, resetting problems, not being updated, physical damages, not properly charged, and more. By Following these solutions, you can resolve this problem.
If this problem {JBl tune 225 TWS earbuds’ one side (left/right) not working} keeps hanging around, it might be a sign that there’s something more serious going on.
In that case, it’s a good idea to get in touch with the folks at JBL support or reach out to professional technicians who know their way around your Jbl tune 225 TWS earbuds. Enjoy your Music!
Ahmed Hussain has dedicated decades of his life to serving the vibrant audio community. With a passion for sound that transcends mere expertise, Ahmed has become a respected figure in the industry. Through years of dedication, Ahmed has not only mastered the technical intricacies of sound but has also become a valued contributor, sharing his knowledge , expert researcher to uplift the entire audio community.