How To Turn on Soundcore Life P3 Without Case ( 8 Methods )

To turn on soundcore life P3 without case, you can simply tap each earbud twice, or hold down the touch area for a few seconds. Alternatively, you can use your voice assistant, bring the earbuds close together (if they have magnets), connect them to a power source, or try resetting them. If these methods don’t work, feel free to contact the support team for assistance.

Now, let’s discuss each potential method in detail for turning on Soundcore Life P3 earbuds without using the case.

Method 1: Double-Tap Gesture

Many wireless earbuds, including various Soundcore earbuds, utilize touch gestures for various functions. While the specific gestures can vary, the double-tap gesture is commonly used to turn on soundcore life P3 without case.

  • Start by removing one of the Soundcore Life P3 earbuds from your ears or from your pocket..
  • Hold the earbud in your hand and gently tap the touch-sensitive surface twice in quick succession.
  • Listen for an audible cue or observe any LED indicators that might signal the earbud has powered on.

If successful, you should now have turned on one of the earbuds using the double-tap gesture. Repeat the process for the other earbud if necessary.

Method 2: Extended Touch

Some earbud models allow you to turn them on by holding down the touchpad for a few seconds. This method might also work to turn on soundcore life P3 without case:

  • Remove one of the earbuds from the ears or from the pocket.
  • Instead of tapping, press and hold the touchpad on the earbud for about 5-8 seconds.
  • Look for any signs of activation, such as a sound or LED light.

If successful, you will have turned on the earbud using the extended touch method. Repeat for the other earbud if needed.

Read: Is Soundcore A Good Brand

Method 3: Voice Assistant

If your Soundcore Life P3 earbuds support voice assistants like Siri or Google Assistant, you might be able to turn on soundcore life P3 without case using voice commands:

  • Ensure the earbuds are not in the charging case and are in close proximity to a paired device (such as a smartphone).
  • Trigger your device’s voice assistant (e.g., “Hey Siri” for Apple devices, or “Hey Google” for Android devices).
  • Issue a command to the voice assistant to turn on the earbuds. For example, you could say “Turn on my Soundcore Life P3 earbuds.”

Keep in mind that voice command capabilities may vary based on your device and firmware compatibility.

Method 4: Magnetic Sensors (If Applicable)

Some earbud models use magnetic sensors to detect when they are taken out of or placed into the charging case. To learn about the features present and absent, you can compare the Soundcore Life P3 VS Anker Soundcore Life P3i Specs. If they have magnetic sensors, this feature might also apply to turn on soundcore life P3 without case:

  • Take both earbuds out of the ears and hold them in your hands.
  • Bring the earbuds close to each other, making sure the magnetic sensors on both earbuds are aligned.
  • Keep the earbuds close together for a few seconds and check for any signs of activation, such as an LED indicator or an audible cue.
  • If your Soundcore Life P3 earbuds have magnetic sensors that trigger power on when they are close together, this method might work to turn them on without the case.

Method 5: Check for Automatic Activation

In some cases, wireless earbuds are designed to automatically power on when they are removed from the charging case, regardless of whether the case is present. The Soundcore Life P3 earbuds might have this feature:

  • Remove one or both earbuds from the charging case.
  • Observe the earbuds for any signs of automatic activation, such as LED indicators lighting up or an audible startup sound.
  • If your earbuds have this functionality, simply removing them from the charging case should be enough to turn them on.

Method 6: Connect to a Power Source

If your earbuds have a low battery and none of the previous methods are working, you can try connecting them to a power source, such as a USB charger or a power bank, using a compatible charging cable. This might provide enough power to initiate the earbuds and turn on soundcore life P3 without case. 

  • Connect the charging cable to a USB charger or power bank.
  • Connect the other end of the cable to the charging port on one of the earbuds.
  • Wait for a few minutes to see if the earbud powers on or shows any signs of activation.

Method 7: Reset the Earbuds

Utilizing the earbuds resetting method, you can effectively resolve issues like why are my soundcore earbuds so quiet and how to turn on Soundcore Life P3 without case. Here’s how to do it (note that this might reset any custom settings or paired devices):

  • Place both earbuds back in your ears.
  • Press and hold the touchpad on both earbuds for about 10-15 seconds.
  • Release the touchpads when you see any indication that the earbuds are resetting, such as LED lights flashing or an audible sound.

Method 8: Contact Customer Support

If none of the above methods work and you’re unable to turn on your Soundcore Life P3 earbuds without the charging case, it’s recommended to contact Soundcore’s customer support. They might be able to provide additional guidance on Soundcore earbuds or suggest troubleshooting steps specific to your earbud model.

Related Articles

How to Find Lost Soundcore Earbuds

Soundcore Earbuds One Side Not Working

How to Pair Soundcore Life P3 Earbuds

Frequently Asked Questions

How to turn on my Soundcore Life P3 headphones without their case?

To turn on your Soundcore Life P3 headphones without using their case, you have several methods at your disposal. You can simply double-tap each earbud, hold down the touch area for a few seconds, use your voice assistant if supported, bring the earbuds close together (if they have magnets), connect them to a power source, try resetting them, or check for automatic activation when removed from the charging case. 

How do I turn on Soundcore without a case?

To turn on your Soundcore device without using a case, you can typically double-tap its touch-sensitive surface, hold down the touch area for a few seconds, use a voice assistant if supported, or connect it to a power source. Refer to your device’s manual or contact Soundcore support for specific instructions based on your model.

Conclusion

The Soundcore Life P3 earbuds offer multiple convenient ways to turn them on without the need for the charging case. Whether it’s a quick double-tap, a press-and-hold gesture, voice command, magnet activation, power source connection, or a reset, these user-friendly methods ensure you’re always ready to enjoy your audio experience. 

However, should you encounter any challenges, don’t hesitate to seek assistance from the dedicated support team. With these versatile options at your disposal, powering on your Soundcore Life P3 earbuds becomes a seamless and hassle-free endeavor.

Leave a Comment